How To Use The Plantronics Voyager 5200 UC Bluetooth Headset

How To Use The Plantronics Voyager 5200 UC Bluetooth Headset

The Plantronics Voyager 5200 comes with a few nice features. But, if you need something with more features, check out our collection of Bluetooth headsets! Most of these Bluetooth headsets, such as the new Leitner LH670, will connect to cell phones, but also include connections for desk phones and computers. You can combine all your business calls into one headset!

Plantronics Voyager 5200 Features
  • A travel case
  • An active mute feature that warns you when mute is on with a beep
  • A special red button that activates, Siri, Cortana, and Google
    • Android mobile devices may require additional configuration for virtual personal assistant features. Please reference your carrier and device manufacturer's instructions to successfully utilize voice commands.

The Voyager 5200 the newer version of the Plantronics Voyager Legend. For more detailed instructions on the Voyager Legend headsets you can check out this article.

For set-up directions for the Voyager Legend headsets, you can view this 5 minute YouTube video: Voyager Legend Video Setup Guide


Using the Voyager 5200

Now that you have the Voyager paired to your phone or other Bluetooth device, it is time to learn how it works!

CONTROLS

ON/OFF: Use the slide switch on the back of the headset to power the headset on. This is just above the charging contacts

VOLUME: To adjust volume, use the Volume Up/Down switch. This is the top button on the back of the headset labeled + and -

MUTE: To mute a call, hit the Voice Recognition Button during a call (this is the button underneath the microphone boom). Tap it again to unmute yourself

ANSWER/END CALLS: To answer calls, hit the Answer Call button on the headset. This is the black shiny button on the outside of the headset. To end a call, tap the same button

CHARGING

HOW: You can either charge your headset on the charging stand and with the including USB charging cable

WHERE: The magnet for charging is on the back of the headset under the On/Off button. Simply match that up to the magnets on the charger you’re using and you’re good to go

WHAT: The charging case can hold a charge for you so that you can charge your headset without being plugged into power! Just plug the charging case into the USB charger to charge it completely. On a complete charge, the case can charge your headset 2x before needing to be recharged

PAIRING

To put the headset into pairing mode:
  1. Power the headset on and press and hold the Call Control button (the silver button at the top of the microphone) for about 3 seconds until you hear the headset say “Pairing.”
    You can also tap the Voice Recognition Button and say “Pair” into the headset.
  2. The light on the back of the headset will flash red/blue while it’s in pairing mode
  3. Now activate Bluetooth on your mobile device and set it to search mode OR plug in your USB dongle (if it’s already plugged in, unplug it, wait 10 seconds, then plug it back in)
  4. Select PLT Legend from the Bluetooth devices list and, if prompted, enter 0000 for the password
  5. Once successfully paired, the light on the headset will stop flashing red/blue and you will hear the headset say “Pairing Successful!”

VOICE RECOGNITION

To activate Voice Recognition, tap the Voice Recognition Button, then wait until the headset says “Say A Command." Your headset is now ready to hear your voice commands

For more information about Voice Recognition with the Voyager Legend, check out this article

COMPUTER USE

PAIRING: The USB Adaptor is pre-paired to your headset. Just insert it into a computer and turn the headset on. You should be good to go :)

GETTING SET UP IN COMPUTER: It should also load to your computer automatically, if not, then head to your computer's sound settings and set it up as the default device under both Input and Output

SOFT PHONES: If you have a softphone that needs call control, that may be possible by downloading Plantronics Hub software Here

https://www.headsetanswers.com/

Comments

Post a Comment

Popular posts from this blog

How To Pair Plantronics Voyager 5200 With BT600 Adapter

Image
How To Pair Plantronics Voyager 5200 With BT600 Adapter If you have the UC version and are wondering how to pair your Plantronics Voyager 5200, don’t fret. We can help you connect to the USB dongle so you can still use the headset on your laptop or computer. Just follow these simple steps. Step 1) Plug the BT600 USB dongle into the computer The Plantronics BT600 USB dongle is very small and needs to be plugged directly into a laptop or computer to get it set up properly.  Step 2) Put the Plantronics BT600 USB dongle in pairing mode You may need to use a pen or paper clip to press and hold that small circular button on the side of the BT600 USB dongle. Press and hold the pairing button for three to five seconds until the light on the front of the USB dongle starts to flash red and blue. This flashing lets you know that your Plantronics BT600 is in pairing mode. Step 3) Press & hold the call control button on the Voyager 5200 for three to five se...
Read more

Plantronics voyager 5200 FAQS 2

Image
Plantronics voyager 5200 FAQS 2 Does it have a mute? yes, it has a mute button. is this the newest version of the Plantronics Voyager out there? The Voyager 5200 and 5220 both say that they are Bluetooth 4.1 (see the Plantronics website for the official product specifications), but the Voyager 5200 UC says that it is “Blutooth 5.0 with BLE” How does one switch between two paired devices (such as answer a call while using it on a screen share on a computer)? In this scenario, receiving a phone call on the second device will send a notification on the headset, at this point you can press the call button once to answer the call and switch the audio over. Can this model connect to laptop? does this package include usb to connect laptop to voyager? Yes, Bluetooth headsets can be used by devices that support them and if your laptop has Bluetooth built-in and it’s adapter has the appropriate profiles (HSP for calls and A2DP for media streaming) it will be able to pair and ...
Read more

Plantronics voyager 5200 FAQS 1

Image
Plantronics voyager 5200 FAQS 1 The information below answers the most commonly asked questions for the Voyager 5200. For further guidance on the Voyager 5200 series please click  here  . Q: Does the Voyager 5200 come with a charging case?  A:  No, the standard Voyager 5200 does not include a portable charging case. Conversely, the  Voyager 5200 UC  version, features a Portable Charging Case, a BT600 USB Bluetooth adapter, 3 different sizes of ear tips and a micro-USB charging cable. Q: Can I use the Voyager 5200 as a microphone for recording videos on my phone? A:  If the phone or app in use support recording through Bluetooth devices you can use the Voyager 5200 or any similar headset; however, most likely this feature won’t work. This is a function that should be built-in the phone and not the headset. Q: I’m unable to answer calls from my headset on my PC Softphone. How to solve this? A:  PC/MAC Bluetooth systems do not typically provid...
Read more